Lehr LoadersCross ConveyorWare Transfer UnitsSix Axis Servo Ware Handling SystemDrive System & ControlsStainless Steel BraidShear BladesCustomer Support
Cross Conveyor Assemblies
Synchroflex Drives Servo Drive Systems for Table and Press Ware
Products > Ware Transfer Units & Transfer Drives >
AWT-1000 Transfer Unit

The AWT 1000 in design and concept is very similar to the HST 6000. This unit has a longer chain and has a different selection of finger spacing’s suitable for handling most types of production. Because of its chain length the Transfer unit while having the same curve profile as the HST 6000 is a larger Transfer and is suitable for direct replacement of some older competitors Transfer Units.

Features and Benefits
  • 4 finger sizes
  • 8 finger spacing configurations
  • ‘Quick Change’ fingers
  • Transfers containers from 40mm to 170mm
  • Adjustable top and bottom ware guides
  • Spacing reduced by 40% through transfer
  • Reduced job set-up time
  • Enhanced container stability
  • Reliable cross conveyor spacing
  • Minimal spares holding
  • Consistent ware handling up to 450BPM
  • Intermediate fingers for 12 and above
  • For optimum performance we recommend use with Sheppee Cross Conveyor
  • Recommended service intervals 12 months
  • Carbon or SSB insulation

Operating Speed:
Up to 450BPM

Standard chain Length:

Chain Pitch:
3⁄4" Duplex

Number of teeth on drive sprocket:

Chain Movement per revolution of drive shaft:
Installation Details and Service Requirements Connection to Lincoln lubrication

Can be driven by servo or synchronous motor drive

Can work with all I.S. machine drive systems

Transfer can be used in conjunction with a Sheppee ITD-8000-2 Transfer Drive Unit or STK-9284 Transfer Drive Gearbox
Download brochure
AWT-1000 brochure (PDF)
Watch Video
AWT 1000 video

Copyright © 2014 Sheppee International. All Rights Reserved. Disclaimer Terms and ConditionsSheppee Webmail